HUB
Side
Type
Hub holes
Before first use
- First select your hub side (front/rear) and hub type (classic/straight pull) and choose a number of spoke holes.
- Click on a single button in the drawing of a corresponding hub to start entering hub measurements.
- This tool also helps you with hub calculations. If you enter W, A and B, you will have calculations of WL, WR (flanges to center) as well as F (flange to flange).
- Once you finish, click on EXPORT TO SPOKECALC button to use this data for your spoke length calculations.
Tip: You don't have to fill all the fields. Spokecalc will work with what you have.
