Calculate the correct spoke length with SpokeCalc. Now also available as a Total wheelbuilding tool.
Discover the true potential of SpokeCalc. All essential wheelbuilding apps in one place.
#addcomponents #savewheels #tensionapp #sharefiles #spokecalculator #addclients #servicehistory #printsheets #tensioncharts #qrcodes
Wheel building tips, techniques & tricks around spoke tension, lacing patterns and truing wheels. Most popular:
IMPORTANT: All measurements are in mm. Also, please enter all the measurements without units.
REMARKS: You can enter decimal values if desired. Make sure you use DOT(.) instead of comma(,) as a separator.
NOTE: This spoke calculator is intended for metal or stainless only and not titanium spokes.
This spoke calculator is provided only as a guide for your convenience in determining spoke lengths. It is provided on an "AS IS" and "WITH ALL FAULTS" basis only. For the calculation function to take place, the disclaimer must be accepted.
Spoke calculator for classic hub type is Damon’s Rinard exact spoke calc, just rewritten as a web application. All the calculations should be the same.
If you like this tool, please like it and share it.
HUB | ||
L | R | |
Type | ||
Flange to center | ||
Flange diameter | ||
RIM | ||
Type | ||
Effective rim diameter | ||
Max rim tension | ||
LACING | ||
Type | ||
Spoke number | ||
Lacing |
Total weight: | ||
Hub | ||
Rim | ||
Spokes | ||
680 g |
Right:
Left:
Please check the following inputs: